23 Commits

Author SHA1 Message Date
a87ed5c9e8 Rev A5: fixup silkscreen 2025-09-01 22:20:24 +12:00
9d8a8014e8 Rev A4 2025-02-02 17:13:38 +13:00
c1046351c5 Generate HTML BOM with Mouser part links 2024-09-27 13:15:46 +12:00
adda8d80b0 Fixup part number for D3 and sync schematic & pcb 2024-09-13 12:08:12 +12:00
32f0f0c3cf Move protection diode away from resistor to make it easier to replace 2024-09-13 11:53:58 +12:00
816a0f6340 Tweak more footprints to make hand assembly easier 2024-08-28 21:08:41 +12:00
25a272fa1e Add protection for reverse installation of the board 2024-08-28 16:20:36 +12:00
11ebac607e Fixup flash rotation in pick and place file 2024-01-15 09:46:33 +13:00
b8b0178772 Change R17 from 330 to 1K (IDE LED was insanley bright) 2023-10-22 17:03:44 +02:00
4ca94ddd3d Route second bank select 2023-10-13 12:57:01 +02:00
c99f8d6eb1 Route bank select pin to ROM 2023-10-08 16:05:52 +02:00
50fadde109 Fixup LED circuit 2023-10-07 17:04:51 +02:00
ee9068b231 Add CS1 to both IDE channels 2023-09-25 20:45:57 +02:00
dc50974a5e Rev A1: changes
* Dump BUSRST and use regular reset
* Ditch the worthless ferrites
* Add the gadget header
* Add A2000/4000 LED Header
2023-09-20 23:32:05 +02:00
819a9eccb6 Proto A1
* Fix LED pinout
* Reduce LED resistor to 150 Ohm
* Separate Primary/Secondary channel Activity signals
2023-08-21 22:54:13 +02:00
279bfcb175 Release Rev_A 2023-07-24 16:56:39 +02:00
101214b9b1 Move Disable jumper
Also route the signal through a buffer to protect the CPLD
2023-07-16 17:23:13 +02:00
c13ef80952 Add JLC Part numbers for IDE Connectors & TH caps 2023-07-13 16:41:54 +02:00
abee39926c Change some resistor values from 10K to 1K out of paranoia 2023-07-13 15:54:51 +02:00
32846236ff Add pull-up for unconnected CS1 pin of IDE channels 2023-07-12 20:29:08 +02:00
2e87b06f37 Move ROM and CPLD data connections to buffered side 2023-07-12 10:30:23 +02:00
9353015e6d Routing complete, need to double-check 2023-07-10 16:23:03 +02:00
12f0d58f16 Initial commit. 2023-02-09 14:20:20 +01:00