Add Kibot automation

Kicad/.gitignore

@@ -4,6 +4,7 @@
 # Temporary files
 *.000
 *.bak
+*-bak
 *.bck
 *.kicad_pcb-bak
 *.kicad_sch-bak
@@ -15,6 +16,9 @@ _autosave-*
 *-save.pro
 *-save.kicad_pcb
 fp-info-cache
+*-erc.txt
+*-drc.txt
+kibot_errors.filter
 
 # Netlist files (exported from Eeschema)
 *.net

Kicad/Makefile

@@ -0,0 +1,30 @@
+PROJECT=GottaGoFaSDZ3
+KIBOT_CONF=./kibot/release.kibot.yaml
+GERBER_OUTPUT=../Gerbers
+
+DRILLS=$(GERBER_OUTPUT)/$(PROJECT)-NPTH.drl $(GERBER_OUTPUT)/$(PROJECT)-PTH.drl
+
+GERBERS=$(GERBER_OUTPUT)/$(PROJECT)-B_Cu.gbr $(GERBER_OUTPUT)/$(PROJECT)-B_Mask.gbr $(GERBER_OUTPUT)/$(PROJECT)-B_Silkscreen.gbr $(GERBER_OUTPUT)/$(PROJECT)-Edge_Cuts.gbr $(GERBER_OUTPUT)/$(PROJECT)-F_Cu.gbr $(GERBER_OUTPUT)/$(PROJECT)-F_Mask.gbr $(GERBER_OUTPUT)/$(PROJECT)-F_Silkscreen.gbr $(GERBER_OUTPUT)/$(PROJECT)-F_Paste.gbr $(GERBER_OUTPUT)/$(PROJECT)-B_Paste.gbr $(DRILLS)
+
+JLCPCB=$(GERBER_OUTPUT)/$(PROJECT)_bom_jlc.csv $(GERBER_OUTPUT)/$(PROJECT)_cpl_jlc.csv
+.PHONY: release
+
+
+all:	$(GERBERS) $(JLCPCB) ../Docs/Schematic.pdf ../ibom/$(PROJECT)-ibom.html
+
+schematic: ../Docs/Schematic.pdf
+gerbers: $(GERBERS)
+jlcpcb: $(JLCPCB)
+ibom: ../ibom/$(PROJECT)-ibom.html
+
+$(GERBERS) ../Docs/PCB.png:	$(PROJECT).kicad_pcb
+	kibot -c $(KIBOT_CONF) Gerbers Drills Image
+
+$(JLCPCB): $(PROJECT).kicad_pcb $(PROJECT).kicad_sch
+	kibot -c $(KIBOT_CONF) JLCPCB_position JLCPCB_bom
+
+../Docs/Schematic.pdf:	$(PROJECT).kicad_sch
+	kibot -s all -c $(KIBOT_CONF) Schematic
+
+../ibom/$(PROJECT)-ibom.html:	$(PROJECT).kicad_pcb
+	kibot -s all -c $(KIBOT_CONF) IBOM

Kicad/kibot/release.kibot.yaml

@@ -0,0 +1,176 @@
+kibot:
+  version: 1
+
+filters:
+  - name: 'exclude_tht'
+    type: 'generic'
+    comment: 'Exclude thru-hole parts'
+    exclude_tht: true
+  - name: 'fix_rotation'
+    comment: 'Adjust rotation for JLC'
+    type: rot_footprint
+    rotations:
+      - ["^TSOP-II", 270.0]
+      - ["^SOT-89", 180.0]
+
+
+variants:
+  - name: rotated
+    comment: 'Just a place holder for the rotation filter'
+    type: kibom
+    variant: rotated
+    pre_transform: 'fix_rotation'
+
+preflight:
+  check_zone_fills: true
+  fill_zones: false
+  run_drc: true
+  run_erc: true
+  update_xml: true
+  ignore_unconnected: true
+  filters:
+    - error: 'pin_not_connected'
+      filter: 'Pin not connected'
+    - error: 'silk_overlap'
+      filter: 'Silkscreen overlap'
+    - error: 'pin_not_driven'
+      filter: 'Input pin not driven by output'
+      regex: 'Input pin not driven by any Output pins'
+
+outputs:
+  - name: Gerbers
+    comment: "Generate gerber files"
+    type: gerber
+    dir: '../Gerbers'
+    options:
+      exclude_edge_layer: true
+      exclude_pads_from_silkscreen: true
+      plot_sheet_reference: false
+      plot_footprint_refs: true
+      plot_footprint_values: false
+      force_plot_invisible_refs_vals: false
+      tent_vias: true
+      use_protel_extensions: false
+      create_gerber_job_file: false
+      disable_aperture_macros: true
+      gerber_precision: 4.6
+      use_gerber_x2_attributes: false
+      use_gerber_net_attributes: false
+      line_width: 0.1
+      subtract_mask_from_silk: true
+      inner_extension_pattern: '.gbr'
+      use_aux_axis_as_origin: true
+
+    layers:
+      - F.Cu
+      - B.Cu
+      - In1.Cu
+      - In2.Cu
+      - F.SilkS
+      - B.SilkS
+      - F.Paste
+      - B.Paste
+      - F.Mask
+      - B.Mask
+      - Edge.Cuts
+
+  - name: Drills
+    comment: Drill files
+    type: excellon
+    dir: '../Gerbers'
+    options:
+      pth_id: '-PTH'
+      npth_id: '-NPTH'
+      metric_units: true
+      route_mode_for_oval_holes: false
+      pth_and_npth_single_file: false
+      use_aux_axis_as_origin: true
+      output: "%f%i.%x"
+
+  - name: Schematic
+    comment: "Output PDF Schematic"
+    type: pdf_sch_print
+    options:
+      frame: true
+      output: "../Docs/Schematic.pdf"
+
+  - name: IBOM
+    type: ibom
+    comment: "Generate HTML Interactive BOM"
+    dir: ../ibom
+    options:
+      output: 'ibom.html'
+      include_tracks: true
+      layer_view: FB
+      blacklist: 'CN1,J1'
+      highlight_pin1: true
+      include_nets: true
+      dark_mode: true
+
+  - name: 3dImage
+    type: render_3d
+    comment: "3D Render"
+    run_by_default: true
+    options:
+      ray_tracing: false
+      output: ../Docs/PCB.png
+      zoom: 8
+      view: top
+      no_tht: true
+      orthographic: true
+      download: false
+      width: 1300
+      height: 530
+
+  - name: Image
+    type: pcbdraw
+    comment: "Draw PCB"
+    options:
+      output: ../Docs/PCB.png
+      format: png
+      show_components: none
+
+  - name: 'JLCPCB_position'
+    comment: "Pick and place file, JLCPCB style"
+    type: position
+    options:
+      variant: rotated
+      output: '../Gerbers/%f_cpl_jlc.%x'
+      format: CSV
+      units: millimeters
+      separate_files_for_front_and_back: false
+      use_aux_axis_as_origin: true
+      only_smd: true
+      columns:
+        - id: Ref
+          name: Designator
+        - Val
+        - Package
+        - id: PosX
+          name: "Mid X"
+        - id: PosY
+          name: "Mid Y"
+        - id: Rot
+          name: Rotation
+        - id: Side
+          name: Layer
+
+  - name: 'JLCPCB_bom'
+    comment: "BoM for JLCPCB"
+    type: bom
+    options:
+      output: '../Gerbers/%f_%i_jlc.%x'
+      exclude_filter: 'exclude_tht'
+      ref_separator: ','
+      columns:
+        - field: Value
+          name: Comment
+        - field: References
+          name: Designator
+        - Footprint
+        - field: 'LCSC #'
+          name: 'LCSC Part #'
+      csv:
+        hide_pcb_info: true
+        hide_stats_info: true
+        quote_all: true